Skip to content
Axil Pro
filling & capping
PRO TIP
Do not remove the silicone plug when filling.
  • Step 1: Blunt tip needle in a filling hole
  • Step 2: 90-135°F fill temperature
  • Step 3: Oil above 135°F floods the atomizer
  • Step 4: 1.05mL fill line
  • Step 5: Cap within 3 minutes

PRO TIP
Before capping, use the top jig plate to gently press and align the long Axil mouthpieces.

  • Step 1: Press the mouthpiece down vertically
  • Step 2: Do not use a hammer or mallet
  • Step 3: Do not press at an angle
  • Step 4: Check the pressure carefully
  • Step 5: You cannot remove the mouthpiece
  • Step 6: 30 minutes - 12 hours